Blogs » Arts & Culture » Why Is It Necessary For Your Data Center To Have A Raised Floor

Why Is It Necessary For Your Data Center To Have A Raised Floor

  • A raised floor is a type of Calcium Sulfate access floor that is installed in a data center and is constructed two to four feet above the concrete floor. The result is the creation of a space in which mechanical, electrical, and cooling services can be provided. Data centers frequently make use of raised raised floor system as a method of dispersing cold air throughout the facility. In establishments where a raised floor system systems is utilized, there is a decreased demand for the volume of air that is required to cool the space.

    accessfloorstore.com

     

    When this technology is combined with an artificial intelligence cooling solution, the potential for cost savings increases even further. According to research on the impact that elevated floors have on the thermal behavior of commercial buildings, the mere presence of a raised flooring system supplier can reduce the amount of cooling that is required by as much as forty percent.

    Floor Raising Offers These Advantages Due to the Fact That:

    Although advancements in technology have made it possible to do away with the requirement for raised flooring, one must question whether or not this choice is really that straightforward. There are a few things that need your consideration.

    Cooling:
    Where exactly will the CRAC units be installed, and will they be on the perimeter, in the rows, above, or in a hybrid configuration? Altering the ductwork in the ceiling is a more challenging task than rearranging the floor tiles in order to optimize airflow patterns and ensure the separation of hot and cold air. In addition, overhanging ducting could make cable tray routing and the installation of other systems more challenging. In the event that there is a leak, it is also more difficult to locate chilled water lines that are above ground.

    Power Management:
    In what precise manner is the rack going to get its supply of energy? Every piece of equipment needs to be able to plug in if power is supplied from the top. Large pieces of business equipment, such as disk arrays and tape libraries, may require power cables to exit the bottom of the rack. In a setting that does not have raised floors, some of these large power wires may be unsightly or present a trip hazard. When the area beneath the floor is used as a cooling plenum, different pieces of machinery may have different airflow requirements (such as being vented from the top or the side), which makes it simpler to manage them. In a setting that does not have raised floors, some of these large power wires may present a trip hazard.

    Maintenance:
    The tiles present a potential entry point for dirt and dust into the equipment. The good news is that the majority of data centers perform routine cleaning beneath the elevated floors. This keeps the space beneath the elevated floor tiles clean and free of any pollutants, which reduces the amount of polluted air that is forced into the servers, which in turn reduces the amount of contaminants that are released into the working environment. The tiles present a potential entry point for dirt and dust into the working environment. The tiles present a potential

    Elevated Flooring in Order to Improve the Performance of the Air-Conditioning System
    In 2012, raised flooring systems were installed in six out of ten newly constructed commercial buildings in Japan and throughout most of Europe. Access flooring is used for cooling up to 90 percent of the data centers that are currently operating in the United States. A number of studies have shown that installing raised flooring systems in commercial spaces can result in an increase of the total air capture rate by 93%. As a direct consequence of this, a room's volume of byproducts such as carbon monoxide and nitrogen dioxide is reduced.

    Access flooring airflow panes are also known as perforated floor access panels, and they were developed specifically for use in under-floor air distribution, which is abbreviated as UFAD. In the long run, this results in a reduction in the amount of energy that is consumed by heating, ventilation, and air conditioning (HVAC) systems.

    Access flooring enables the conditioned air to be distributed upward into the room through perforated floor access panels or blowers from under the raised Calcium Sulfate access floor system. Access flooring is what makes this possible. Additionally, ducts can be utilized to deliver direct cooling to specific areas and pieces of equipment.

    A Few Reflections Before We Go:

    Although raised floors are one of the oldest architectural standards for data centers, they are still a popular technique for controlling the amount of cooling that is required and the rollout of cables. The administrators of a data center can ensure that their facilities will continue to be effective and productive for a considerable amount of time into the future by maximizing the potential of elevated floors. Your electrical and data center infrastructure can be vulnerable to flaws.